Important – The Local Electricity Supply Authority may require
limits on – starting current, running current and voltage
drop. Please check prior to purchase.
(1) Nominal
Capacity (kW) relates to the compressor capacity. (Heating
includes input power)
Design Conditions - Cooling: 35°C DB Outdoor / Air Entering
Indoor 27°C DB, 19°C WB.
Heating: 7°C DB, 6°C WB Outdoor / Air Entering Indoor 20°C
DB.
Operating Conditions - Cooling: 15°C DB to 50°C DB Outdoor /
Air Entering Indoor 29°C DB.
Heating: –5°C to 21°C DB Outdoor / Air Entering Indoor 21°C
DB.
(2) EER = Energy Efficiency Ratio (Nett Capacity Cooling ÷
Input Power Cooling)
(3) COP = Coefficient Of Performance (Nett Capacity Heating ÷
Input Power Heating)
(4) Sound Pressure Level at 3m distance is determined as the
measured sound pressure at 3m perpendicular to the coil side of
the condenser. Results are based on outdoor conditions over a
hard reflecting surface for the ground plane only, with no walls
or other obstructions nearby. Two values provided: one at low
speed outdoor fan and one at high speed outdoor fan. Sound
levels may vary in different locations and surroundings.
(5) Sound Power Levels are measured in accordance with the
requirements of the Department of Environment and Conservation
(NSW) under the Australian Environment Council 'Technical Basis
for the Regulation of Noise Labelling of New Air Conditioners in
Australia'. The measurement procedures contained in this
regulation are equivalent to Australian Standard AS1217.2
'Acoustics – Determination of Sound Power Levels of Noise
Sources Part 2 – Precision Methods for Broad-Band Sources in
Reverberation Rooms'.
Specifications subject to change without notice.
|
